Oil retention |
Standard “S” Lip |
This style of lip is used for standard pressure oil sealing in clean environments. May be reversed for extreme grease sealing. |
![Standard Lip S](../../../../media/engineering/lip_s.gif) |
Oil retention for medium pressure applications |
Standard “SN” Lip |
This style of lip has a shortened flex section to accomodate medium pressures. |
![Standard SN Lip](../../../../media/engineering/lip_sn.gif) |
Oil retention for dusty applications |
Standard “T” Lip |
This style of lip is used for standard pressure oil sealing in dusty / dirty environments. |
![Standard T Lip](../../../../media/engineering/lip_t.gif) |
Oil retention for medium pressure applications |
Standard “TN” Lip |
This style of lip has a shortened flex section to accomodate medium pressures. |
![Standard TN Lip](../../../../media/engineering/lip_tn.gif) |
Grease retention applications |
Standard “V” Lip |
This style of lip is used for standard pressure grease sealing in clean environments. May be reversed to purge grease cavity. |
![Standard V Lip](../../../../media/engineering/lip_v.gif) |
Grease retension for dusty applications |
Standard “K” Lip |
This style of lip is used for standard pressure grease sealing in dusty / dirty environments. |
![Standard K Lip](../../../../media/engineering/lip_k.gif) |
Oil retention for applications with low lubrication |
Standard “X” Lip |
This style of lip is used for standard pressure sealing of none lubricating fluids. Inverted dust lip retains grease near sealing lip. |
![Standard X Lip](../../../../media/engineering/lip_x.gif) |
Separating two fluids |
Standard “D” Lip |
This style of lip is used for standard pressure separation of two fluid. |
![Standard D Lip](../../../../media/engineering/lip_d.gif) |
Grease retention in heavy contamination environment |
Standand “U” Lip |
This style of lip is used for standard pressure grease sealing in extreme / heavy contamination environments. Flexible lips allow for purging of grease cavity from either direction. |
![Standard U Lip](../../../../media/engineering/lip_u.gif) |
Grease retention in heavy contamination environment |
Standand “T9” Lip |
This style of lip is used for standard pressure grease sealing in extreme / heavy contamination environments. Lip on outside face is designed to act as an axial face seal. |
![Standard T9 Lip](../../../../media/engineering/lip_t9.gif) |
Contamination exclusion |
Standand “WP” Lip |
This style of lip is used for scraping and wiping in hydraulic and pnuematic cylinder applications. |
![Standard WP Lip](../../../../media/engineering/lip_wp.gif) |