Parker Tetrafluoroethylene Propylene (TFE/P) O-Rings

Parker Tetrafluoroethylene Propylene (TFE/P) O-Ring Material Description:

This elastomer is a copolymer of tetrafluoroethylene (TFE) and propylene. Its chemical resistance is excellent across a wide range of aggressive media.

Parker O-Ring Distributor

For over 50 years, Engineered Seal Products has partnered with Parker Seals. ESP is proud to be one of the FEW Premier Distributors to qualify as a "Parker Seal Technology Center (STC)".

What does Parker STC mean?

  • Proven Engineering Capability
  • Expert Material & Technical Support
  • ISO Quality Approval
  • Strong Financial Track Record
Parker (TFE/P) Chemical Resistance:
  • Bases.
  • Phosphate Esters.
  • Amines.
  • Engine Oils.
  • Steam and hot water.
  • Pulp and paper liquors.
Parker (TFE/P) Not Compatible With:
  • Aromatic Fuels.
  • Ketones.
  • Chlorinated hydrocarbons.

Parker Tetrafluoroethylene Propylene (TFE/P) O-Ring Compound Numbering System:

Parker has two types of nomenclature used to reference (TFE/P) products.

Polymer Code (Single Letter)
Sequence Number (Four Digits)
Durometer Indicator (Two Digits)

- OR -

Polymer Code (Single Letter)
Special Property Description (Single Letter)
Sequence Number (Three Letters)
Durometer Indicator (Two Digits)

Special Property Descriptions:

General Purpose
Low Compression Set
Ethylene Acrylate or (Vamac®)
Fuel Resistant or Fully Fluorinated
Higher Fluorine Content
NSF/FDA/WRAS Approvals
Internally Lubed
Mil/AMS Specifications
Low Temperature Flexible
Non-Black Compound

Parker Tetrafluoroethylene Propylene (TFE/P) O-Ring Compounds:

Parker Compound Number Datasheet Hardness (Shore A) Low Temp High Temp Color Recommended For
V1006-75 PDF 75 +- 5 25 450 Black AMS 7255
VP101-80 PDF 80 +- 5 25 450 Black General Purpose
VP102-80 PDF 80 +- 5 15 450 Black Low Compression Set
V1041-85 PDF 85 +- 5 15 450 Black RGD Resistant, General Purpose, NORSOK M710
VP103-95 PDF 90 +- 5 25 450 Black Extrusion Resistant

ASTM Designation
Shelf Life
25 Years
Hardness (Shore A) Range
70 - 95

Temperature ranges will apply to the majority of media for which the material is potentially recommended. With some media however, the service temperature range may be significantly different. ALWAYS TEST UNDER ACUTAL SERVICE CONDITIONS.

ESP’s shelf life recommendation is based on the ARP 5316 standard and intended to be utilized by those organizations who do not already have specific recommendations for the control of elastomeric seals. It should be noted that the packaging of the elastomeric seals prior to assembly into a product is an integral part of the controlled storage procedure. It provides a positive means of product identity from the time of manufacture, to the time of assembly.