Disogrin Hydraulic Symmetrical Seals

LSU series with O-Ring energized lips assure a uniform, positive lip contact plus excellent low pressure sealing. Seal depth is equal to radial width. LSU series are used to interchange an existing hydraulic packing and/or O-Rings.

Technical Data

Applications

• Earth moving equipment
• Forklifts
• Agricultural equipment
• Tailgate lifts
• Mobile arms
• Injection molding
• Standard hydraulics
• The Standard LSU design has non-beveled lips for minimum friction and a square cross section (nominal length is equal to nominal radial width). Available in 1/8″ to 5/8″ cross sections.

The Standard LSU design has non-beveled lips for minimum friction and a square cross section (nominal length is equal to nominal radial width). Available in 1/8″ to 5/8″ cross sections.

• Designs employ o-ring like energizers to assure uniform, positive lip contact for excellent low and high pressure rod and piston sealing applications
• Designs retrofit existing seal grooves, no need to change hardware
• Offers a range of seal and energizer material combinations to meet a wide range of temperature and pressure requirements, as well as resistance to wear and extrusion

LSU-B series back beveled sealing lip provides greater film breaking and increased until loading at the sealing surface. Seal depth is generally 1.5 times the cross section of radial width to insure seal stability in most rugged applications. ROD SEAL use is preferred.

Technical Data

Applications

• Earth moving equipment
• Forklifts
• Agricultural equipment
• Tailgate lifts
• Mobile arms
• Injection molding
• Standard hydraulics
• The Standard LSU design has non-beveled lips for minimum friction and a square cross section (nominal length is equal to nominal radial width). Available in 1/8″ to 5/8″ cross sections.

Designs employ o-ring like energizers to assure uniform, positive lip contact for excellent low and high pressure rod and piston sealing applications

• Designs employ o-ring like energizers to assure uniform, positive lip contact for excellent low and high pressure rod and piston sealing applications
• Designs retrofit existing seal grooves, no need to change hardware
• Offers a range of seal and energizer material combinations to meet a wide range of temperature and pressure requirements, as well as resistance to wear and extrusion

LSU-D’s series depth is 1.5 times greater than radial width. Increased seal stability to withstand rugged, high shock, heavy duty applications. DEEP LSU can replace vee packing or other old fashioned seals. For minimum drag use STANDARD LSU or DEEP LSU Series.

Technical Data

Applications

• Earth moving equipment
• Forklifts
• Agricultural equipment
• Tailgate lifts
• Mobile arms
• Injection molding
• Standard hydraulics
• The Standard LSU design has non-beveled lips for minimum friction and a square cross section (nominal length is equal to nominal radial width). Available in 1/8″ to 5/8″ cross sections.

Designs employ o-ring like energizers to assure uniform, positive lip contact for excellent low and high pressure rod and piston sealing applications

• Designs employ o-ring like energizers to assure uniform, positive lip contact for excellent low and high pressure rod and piston sealing applications
• Designs retrofit existing seal grooves, no need to change hardware
• Offers a range of seal and energizer material combinations to meet a wide range of temperature and pressure requirements, as well as resistance to wear and extrusion

LSU-SQB series – the square version of LSU-B – has the same overall dimensions of standard LSU, but slightly more ‘squeeze’. Back bevel design gives greater film breaking ability and increases sealing surface unit load.

Technical Data

Applications

• Earth moving equipment
• Forklifts
• Agricultural equipment
• Tailgate lifts
• Mobile arms
• Injection molding
• Standard hydraulics
• The Standard LSU design has non-beveled lips for minimum friction and a square cross section (nominal length is equal to nominal radial width). Available in 1/8″ to 5/8″ cross sections.

The Standard LSU design has non-beveled lips for minimum friction and a square cross section (nominal length is equal to nominal radial width). Available in 1/8″ to 5/8″ cross sections.

• Designs employ o-ring like energizers to assure uniform, positive lip contact for excellent low and high pressure rod and piston sealing applications
• Designs retrofit existing seal grooves, no need to change hardware
• Offers a range of seal and energizer material combinations to meet a wide range of temperature and pressure requirements, as well as resistance to wear and extrusion

SYM symmetrical U-cup is suited for heavy duty mobile and stationary applications. For piston or rod sealing use.

Technical Data

Applications

• Buffer seals
• Earth moving equipment
• Fork lift trucks
• Agricultural equipment
• HGV loading cranes
• Injection molding machines
• Standard cylinders

Two-part seal set for use as a primary rod seal. The Syprim seal set SM is always used in combination with packing (e.g.T20) within a sealing system. The Syprim seal is designed especially for use as a system seal.

• Quick-assembly primary seal
• No pressure entrapment between primary and secondary seal low friction
• Low friction
• Highly wear resistant
• Activated backup ring prevents extrusion